View MRF6S19140H_549057.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

Freescale Semiconductor Technical Data
Document Number: MRF6S19140H Rev. 4, 5/2006
RF Power Field Effect Transistors
N - Channel Enhancement - Mode Lateral MOSFETs
Designed for PCN and PCS base station applications with frequencies from 1930 to 1990 MHz. Suitable for TDMA, CDMA and multicarrier amplifier applications. To be used in Class AB for PCN - PCS/cellular radio and WLL applications. * Typical 2 - Carrier N - CDMA Performance: VDD = 28 Volts, IDQ = 1150 mA, Pout = 29 Watts Avg., Full Frequency Band. IS - 95 (Pilot, Sync, Paging, Traffic Codes 8 Through 13) Channel Bandwidth = 1.2288 MHz. PAR = 9.8 dB @ 0.01% Probability on CCDF. Power Gain -- 16 dB Drain Efficiency -- 27.5% IM3 @ 2.5 MHz Offset -- - 37 dBc in 1.2288 MHz Channel Bandwidth ACPR @ 885 kHz Offset -- - 51 dBc in 30 kHz Channel Bandwidth * Capable of Handling 10:1 VSWR, @ 28 Vdc, 1960 MHz, 140 Watts CW Output Power Features * Characterized with Series Equivalent Large - Signal Impedance Parameters * Internally Matched for Ease of Use * Qualified Up to a Maximum of 32 VDD Operation * Integrated ESD Protection * Lower Thermal Resistance Package * Designed for Lower Memory Effects and Wide Instantaneous Bandwidth Applications * Low Gold Plating Thickness on Leads, 40 Nominal. * RoHS Compliant * In Tape and Reel. R3 Suffix = 250 Units per 56 mm, 13 inch Reel.
MRF6S19140HR3 MRF6S19140HSR3
1930- 1990 MHz, 29 W AVG., 28 V 2 x N - CDMA LATERAL N - CHANNEL RF POWER MOSFETs
CASE 465B - 03, STYLE 1 NI - 880 MRF6S19140HR3
CASE 465C - 02, STYLE 1 NI - 880S MRF6S19140HSR3
Table 1. Maximum Ratings
Rating Drain- Source Voltage Gate- Source Voltage Total Device Dissipation @ TC = 25C Derate above 25C Storage Temperature Range Case Operating Temperature Operating Junction Temperature Symbol VDSS VGS PD Tstg TC TJ Value - 0.5, +68 - 0.5, +12 530 3 - 65 to +150 150 200 Unit Vdc Vdc W W/C C C C
Table 2. Thermal Characteristics
Characteristic Thermal Resistance, Junction to Case Case Temperature 80C, 140 W CW Case Temperature 77C, 29 W CW Symbol RJC Value (1,2) 0.33 0.38 Unit C/W
1. MTTF calculator available at http://www.freescale.com/rf. Select Tools/Software/Application Software/Calculators to access the MTTF calculators by product. 2. Refer to AN1955, Thermal Measurement Methodology of RF Power Amplifiers. Go to http://www.freescale.com/rf. Select Documentation/Application Notes - AN1955.
(c) Freescale Semiconductor, Inc., 2006. All rights reserved.
MRF6S19140HR3 MRF6S19140HSR3 1
RF Device Data Freescale Semiconductor
Table 3. ESD Protection Characteristics
Test Methodology Human Body Model (per JESD22 - A114) Machine Model (per EIA/JESD22 - A115) Charge Device Model (per JESD22 - C101) Class 2 (Minimum) A (Minimum) IV (Minimum)
Table 4. Electrical Characteristics (TC = 25C unless otherwise noted)
Characteristic Off Characteristics Zero Gate Voltage Drain Leakage Current (VDS = 68 Vdc, VGS = 0 Vdc) Zero Gate Voltage Drain Leakage Current (VDS = 28 Vdc, VGS = 0 Vdc) Gate- Source Leakage Current (VGS = 5 Vdc, VDS = 0 Vdc) On Characteristics Gate Threshold Voltage (VDS = 10 Vdc, ID = 300 Adc) Gate Quiescent Voltage (VDS = 28 Vdc, ID = 1150 mAdc) Drain- Source On - Voltage (VGS = 10 Vdc, ID = 3 Adc) Forward Transconductance (VDS = 10 Vdc, ID = 3 Adc) Dynamic Characteristics (1) Reverse Transfer Capacitance (VDS = 28 Vdc 30 mV(rms)ac @ 1 MHz, VGS = 0 Vdc) Crss -- 2 -- pF VGS(th) VGS(Q) VDS(on) gfs 1 2 0.1 -- 2 2.8 0.21 7.2 3 4 0.3 -- Vdc Vdc Vdc S IDSS IDSS IGSS -- -- -- -- -- -- 10 1 1 Adc Adc Adc Symbol Min Typ Max Unit
Functional Tests (In Freescale Test Fixture, 50 ohm system) VDD = 28 Vdc, IDQ = 1150 mA, Pout = 29 W Avg., f1 = 1930 MHz, f2 = 1932.5 MHz and f1 = 1987.5 MHz, f2 = 1990 MHz, 2 - carrier N - CDMA, 1.2288 MHz Channel Bandwidth Carriers. ACPR measured in 30 kHz Channel Bandwidth @ 885 kHz Offset. IM3 measured in 1.2288 MHz Channel Bandwidth @ 2.5 MHz Offset. PAR = 9.8 dB @ 0.01% Probability on CCDF. Power Gain Drain Efficiency Intermodulation Distortion Adjacent Channel Power Ratio Input Return Loss 1. Part is internally matched both on input and output. Gps D IM3 ACPR IRL 15 26 -- -- -- 16 27.5 - 37 - 51 - 15 18 -- - 35 - 48 -9 dB % dBc dBc dB
MRF6S19140HR3 MRF6S19140HSR3 2 RF Device Data Freescale Semiconductor
+ VBIAS R3 + C13 R1 R5 C7 C3 Z5 Z6 Z7 Z8 Z9 B1 C5 C9 C11 C15
VSUPPLY
Z10 C2
RF OUTPUT
RF INPUT
Z1 C1
Z2
Z3
Z4 DUT
VBIAS R4 + C14 R2 R6 C8 C4 B2 C6 C10 C12 VSUPPLY
Z1 Z2 Z3 Z4 Z5 Z6
0.864 x 0.082 Microstrip 1.373 x 0.082 Microstrip 0.282 x 0.900 Microstrip 0.103 x 0.900 Microstrip 0.094 x 1.055 Microstrip 0.399 x 1.055 Microstrip
Z7 Z8 Z9 Z10 PCB
0.115 x 0.569 Microstrip 0.191 x 0.289 Microstrip 0.681 x 0.081 Microstrip 1.140 x 0.081 Microstrip Arlon GX0300 - 55- 22, 0.030, r = 2.5
Figure 1. MRF6S19140HR3(HSR3) Test Circuit Schematic
Table 5. MRF6S19140HR3(HSR3) Test Circuit Component Designations and Values
Part B1, B2 C1, C2 C3, C4, C5, C6 C7, C8, C9, C10, C11, C12 C13, C14 C15 R1, R2 R3, R4 R5, R6 Description Beads, Surface Mount 39 pF Chip Capacitors 9.1 pF Chip Capacitors 10 F, 50 V Chip Capacitors (2220) 47 F, 50 V Electrolytic Capacitors 470 F, 63 V Electrolytic Capacitor 560 k, 1/8 W Chip Resistors (1206) 1.0 k, 1/8 W Chip Resistors (1206) 12 , 1/8 W Chip Resistors (1206) Part Number 2743019447 100B390JP500X 100B9R1CP500X GRM55DR61H106KA88B MVK50VC47RM8X10TP SME63VB471M12X25LL Manufacturer Fair- Rite ATC ATC Murata Nippon United Chemi - Con Dale/Vishay Dale/Vishay Dale/Vishay
MRF6S19140HR3 MRF6S19140HSR3 RF Device Data Freescale Semiconductor 3
6S19140 C13 R3 B1 R5 C3 C5 C9 C11
R1 C1
C7
C15
C2 CUT OUT AREA C4 C6
(c) Motorola, Inc. 2002 DS1464
R2
C8
R4 C14
B2
R6
C10 C12
Freescale has begun the transition of marking Printed Circuit Boards (PCBs) with the Freescale Semiconductor signature/logo. PCBs may have either Motorola or Freescale markings during the transition period. These changes will have no impact on form, fit or function of the current product.
Figure 2. MRF6S19140HR3(HSR3) Test Circuit Component Layout
MRF6S19140HR3 MRF6S19140HSR3 4 RF Device Data Freescale Semiconductor
TYPICAL CHARACTERISTICS
D Gps VDD = 28 Vdc, Pout = 29 W (Avg.), IDQ = 1150 mA 2-Carrier N-CDMA, 2.5 MHz Carrier Spacing, 1.2288 MHz Channel Bandwidth, PAR = 9.8 dB @ 0.01% Probability (CCDF) IRL IM3 ACPR D, DRAIN EFFICIENCY (%) -10 -12 -14 -16 -18 -20 -22 -24 -26 -28 -30 D, DRAIN EFFICIENCY (%) -10 -12 -14 -16 -18 -20 -22 -24 -26 -28 -30 900 mA -30 600 mA -40 IDQ = 1700 mA 1500 mA 100 1000 10 IRL, INPUT RETURN LOSS (dB) IM3 (dBc), ACPR (dBc) IRL, INPUT RETURN LOSS (dB) IM3 (dBc), ACPR (dBc) 20 18 16 Gps, POWER GAIN (dB) 14 12 10 8 6 4 2 0 1910 1920 1930 1940 1950 1960 1970 1980 1990 40 30 20 10 0 -10 -20 -40 -60 -80 -100 2000
f, FREQUENCY (MHz)
Figure 3. 2 - Carrier N - CDMA Broadband Performance @ Pout = 29 Watts Avg.
18 16 Gps, POWER GAIN (dB) 14 12 10 8
D Gps VDD = 28 Vdc, Pout = 75 W (Avg.), IDQ = 1150 mA 2-Carrier N-CDMA, 2.5 MHz Carrier Spacing, 1.2288 MHz Channel Bandwidth, PAR = 9.8 dB @ 0.01% Probability (CCDF)
50 40 30 20 0 -20
IRL IM3
6 4 2 1910
-40 -60
ACPR
1920
1930 1940
1950
1960
1970
1980 1990
-80 2000
f, FREQUENCY (MHz)
Figure 4. 2 - Carrier N - CDMA Broadband Performance @ Pout = 75 Watts Avg.
18 17 1500 mA Gps, POWER GAIN (dB) 16 15 14 13 12 1 10 100 400 Pout, OUTPUT POWER (WATTS) PEP 1150 mA 900 mA 600 mA VDD = 28 Vdc f1 = 1958.75 MHz, f2 = 1961.25 MHz Two-Tone Measurements, 2.5 MHz Tone Spacing IMD, THIRD ORDER INTERMODULATION DISTORTION (dBc) IDQ = 1700 mA
-10 VDD = 28 Vdc f1 = 1958.75 MHz, f2 = 1961.25 MHz Two-Tone Measurements, 2.5 MHz Tone Spacing
-20
-50 1150 mA -60 1 Pout, OUTPUT POWER (WATTS) PEP
Figure 5. Two - Tone Power Gain versus Output Power
Figure 6. Third Order Intermodulation Distortion versus Output Power
MRF6S19140HR3 MRF6S19140HSR3 RF Device Data Freescale Semiconductor 5
TYPICAL CHARACTERISTICS
0 IMD, INTERMODULATION DISTORTION (dBc) -10 -20 -30 -40 -50 -60 0.1 7th Order 3rd Order 5th Order VDD = 28 Vdc, Pout = 160 W (PEP), IDQ = 1150 mA Two-Tone Measurements (f1 + f2)/2 = Center Frequency of 1960 MHz 58 57 56 Pout, OUTPUT POWER (dBm) 55 54 53 52 51 50 49 48 47 46 VDD = 28 Vdc, IDQ = 1150 mA Pulsed CW, 8 sec(on), 1 msec(off) f = 1960 MHz 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 P1dB = 52.3 dBm (171 W) Actual P3dB = 53.1 dBm (204 W) Ideal
1
10
100
TWO-TONE SPACING (MHz)
Pin, INPUT POWER (dBm)
Figure 7. Intermodulation Distortion Products versus Tone Spacing
Figure 8. Pulse CW Output Power versus Input Power
D, DRAIN EFFICIENCY (%), Gps, POWER GAIN (dB)
50 VDD = 28 Vdc, IDQ = 1150 mA f1 = 1958.75 MHz, f2 = 1961.25 MHz 2-Carrier N-CDMA, 2.5 MHz Carrier Spacing, 1.2288 MHz Channel Bandwidth, PAR = 9.8 dB @ 0.01% Probability (CCDF) TC = 25C IM3
-20
40
-30 IM3 (dBc), ACPR (dBc) D -40 ACPR -50 Gps
30
20
10
-60
0 1 10 Pout, OUTPUT POWER (WATTS) AVG.
-70 100
Figure 9. 2 - Carrier N - CDMA ACPR, IM3, Power Gain and Drain Efficiency versus Output Power
17 16 Gps, POWER GAIN (dB) 15 14 13 12 11 10 1 10 Pout, OUTPUT POWER (WATTS) CW D VDD = 28 Vdc, IDQ = 1150 mA f = 1960 MHz, TC = 25C 100 Gps
70 D, DRAIN EFFICIENCY (%) 60 50 40 30 20 10 0 300
18 17 16 Gps, POWER GAIN (dB) 15 14 13 12 11 10 9 8 0 12 V 50 100 150 16 V IDQ = 1150 mA f = 1960 MHz 200 250 20 V 24 V 28 V VDD = 32 V
Pout, OUTPUT POWER (WATTS) CW
Figure 10. Power Gain and Drain Efficiency versus CW Output Power MRF6S19140HR3 MRF6S19140HSR3 6
Figure 11. Power Gain versus Output Power
RF Device Data Freescale Semiconductor
TYPICAL CHARACTERISTICS
1010 MTTF FACTOR (HOURS X AMPS2)
109
108
107 90 100 110 120 130 140 150 160 170 180 190 200 210 TJ, JUNCTION TEMPERATURE (C) This above graph displays calculated MTTF in hours x ampere2 drain current. Life tests at elevated temperatures have correlated to better than 10% of the theoretical prediction for metal failure. Divide MTTF factor by ID2 for MTTF in a particular application.
Figure 12. MTTF Factor versus Junction Temperature
N - CDMA TEST SIGNAL
100 10
0 -10 -20 -IM3 in 1.2288 MHz Integrated BW
1.2288 MHz Channel BW
PROBABILITY (%)
1 0.1 0.01 0.001 0.0001 0 2 4 6 8 10 PEAK-TO-AVERAGE (dB) IS-95 CDMA (Pilot, Sync, Paging, Traffic Codes 8 Through 13) 1.2288 MHz Channel Bandwidth Carriers. ACPR Measured in 30 kHz Bandwidth @ 885 kHz Offset. IM3 Measured in 1.2288 MHz Bandwidth @ 2.5 MHz Offset. PAR = 9.8 dB @ 0.01% Probability on CCDF. (dB)
-30 -40 -50 -60 -70 -80 -90 -100 -7.5 -6
+IM3 in 1.2288 MHz Integrated BW
-ACPR in 30 kHz Integrated BW
+ACPR in 30 kHz Integrated BW
Figure 13. 2 - Carrier CCDF N - CDMA
-4.5
-3
-1.5
0
1.5
3
4.5
6
7.5
f, FREQUENCY (MHz)
Figure 14. 2 - Carrier N - CDMA Spectrum
MRF6S19140HR3 MRF6S19140HSR3 RF Device Data Freescale Semiconductor 7
f = 2020 MHz
Zload f = 1900 MHz Zo = 5
Zsource f = 1900 MHz f = 2020 MHz
VDD = 28 Vdc, IDQ = 1150 mA, Pout = 29 W Avg. f MHz 1900 1930 1960 1990 2020 Zsource 2.27 - j3.95 2.00 - j4.24 1.72 - j3.96 1.80 - j3.51 1.69 - j3.17 Zload 1.13 - j0.67 1.11 - j0.60 1.07 - j0.46 1.06 - j0.30 1.01 - j0.17
Zsource = Test circuit impedance as measured from gate to ground. Zload = Test circuit impedance as measured from drain to ground.
Input Matching Network
Device Under Test
Output Matching Network
Z
source
Z
load
Figure 15. Series Equivalent Source and Load Impedance MRF6S19140HR3 MRF6S19140HSR3 8 RF Device Data Freescale Semiconductor
NOTES
MRF6S19140HR3 MRF6S19140HSR3 RF Device Data Freescale Semiconductor 9
NOTES
MRF6S19140HR3 MRF6S19140HSR3 10 RF Device Data Freescale Semiconductor
PACKAGE DIMENSIONS
B G 4
1 2X
Q bbb
M
TA
M
B
M
(FLANGE) 3
B
NOTES: 1. DIMENSIONING AND TOLERANCING PER ANSI Y14.5M-1994. 2. CONTROLLING DIMENSION: INCH. 3. DIMENSION H IS MEASURED 0.030 (0.762) AWAY FROM PACKAGE BODY. 4. RECOMMENDED BOLT CENTER DIMENSION OF 1.16 (29.57) BASED ON M3 SCREW. INCHES MIN MAX 1.335 1.345 0.535 0.545 0.147 0.200 0.495 0.505 0.035 0.045 0.003 0.006 1.100 BSC 0.057 0.067 0.175 0.205 0.872 0.888 0.871 0.889 .118 .138 0.515 0.525 0.515 0.525 0.007 REF 0.010 REF 0.015 REF MILLIMETERS MIN MAX 33.91 34.16 13.6 13.8 3.73 5.08 12.57 12.83 0.89 1.14 0.08 0.15 27.94 BSC 1.45 1.70 4.44 5.21 22.15 22.55 19.30 22.60 3.00 3.51 13.10 13.30 13.10 13.30 0.178 REF 0.254 REF 0.381 REF
K D TA
2
bbb
M
M
B
M
M bbb ccc H
M
(INSULATOR)
R ccc
M
(LID) M (INSULATOR) M
TA TA
M
B B
M
TA
M
B S
N
M M M
(LID)
aaa C
M
TA
M
B
DIM A B C D E F G H K M N Q R S aaa bbb ccc
F E A
(FLANGE)
T A
SEATING PLANE
STYLE 1: PIN 1. DRAIN 2. GATE 3. SOURCE
CASE 465B - 03 ISSUE D NI - 880 MRF6S19140HR3
B
1
(FLANGE)
B
K D TA
2
NOTES: 1. DIMENSIONING AND TOLERANCING PER ANSI Y14.5M-1994. 2. CONTROLLING DIMENSION: INCH. 3. DIMENSION H IS MEASURED 0.030 (0.762) AWAY FROM PACKAGE BODY. M
bbb
M
B
M DIM A B C D E F H K M N R S aaa bbb ccc INCHES MIN MAX 0.905 0.915 0.535 0.545 0.147 0.200 0.495 0.505 0.035 0.045 0.003 0.006 0.057 0.067 0.170 0.210 0.872 0.888 0.871 0.889 0.515 0.525 0.515 0.525 0.007 REF 0.010 REF 0.015 REF MILLIMETERS MIN MAX 22.99 23.24 13.60 13.80 3.73 5.08 12.57 12.83 0.89 1.14 0.08 0.15 1.45 1.70 4.32 5.33 22.15 22.55 19.30 22.60 13.10 13.30 13.10 13.30 0.178 REF 0.254 REF 0.381 REF
M bbb ccc H C
M
(INSULATOR)
R ccc
M
(LID) M (INSULATOR) M
TA TA
M
B B
M
TA TA
M
B S B
N
M M M
(LID)
aaa
M
M
F E A
(FLANGE)
T A
SEATING PLANE
STYLE 1: PIN 1. DRAIN 2. GATE 3. SOURCE
CASE 465C - 02 ISSUE D NI - 880S MRF6S19140HSR3
MRF6S19140HR3 MRF6S19140HSR3 RF Device Data Freescale Semiconductor 11
How to Reach Us:
Home Page: www.freescale.com E - mail: support@freescale.com USA/Europe or Locations Not Listed: Freescale Semiconductor Technical Information Center, CH370 1300 N. Alma School Road Chandler, Arizona 85224 +1 - 800- 521- 6274 or +1 - 480- 768- 2130 support@freescale.com Europe, Middle East, and Africa: Freescale Halbleiter Deutschland GmbH Technical Information Center Schatzbogen 7 81829 Muenchen, Germany +44 1296 380 456 (English) +46 8 52200080 (English) +49 89 92103 559 (German) +33 1 69 35 48 48 (French) support@freescale.com Japan: Freescale Semiconductor Japan Ltd. Headquarters ARCO Tower 15F 1 - 8 - 1, Shimo - Meguro, Meguro - ku, Tokyo 153 - 0064 Japan 0120 191014 or +81 3 5437 9125 support.japan@freescale.com Asia/Pacific: Freescale Semiconductor Hong Kong Ltd. Technical Information Center 2 Dai King Street Tai Po Industrial Estate Tai Po, N.T., Hong Kong +800 2666 8080 support.asia@freescale.com For Literature Requests Only: Freescale Semiconductor Literature Distribution Center P.O. Box 5405 Denver, Colorado 80217 1 - 800- 441- 2447 or 303 - 675- 2140 Fax: 303 - 675- 2150 LDCForFreescaleSemiconductor@hibbertgroup.com
Information in this document is provided solely to enable system and software implementers to use Freescale Semiconductor products. There are no express or implied copyright licenses granted hereunder to design or fabricate any integrated circuits or integrated circuits based on the information in this document. Freescale Semiconductor reserves the right to make changes without further notice to any products herein. Freescale Semiconductor makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does Freescale Semiconductor assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation consequential or incidental damages. "Typical" parameters that may be provided in Freescale Semiconductor data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including "Typicals", must be validated for each customer application by customer's technical experts. Freescale Semiconductor does not convey any license under its patent rights nor the rights of others. Freescale Semiconductor products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the Freescale Semiconductor product could create a situation where personal injury or death may occur. Should Buyer purchase or use Freescale Semiconductor products for any such unintended or unauthorized application, Buyer shall indemnify and hold Freescale Semiconductor and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that Freescale Semiconductor was negligent regarding the design or manufacture of the part. Freescalet and the Freescale logo are trademarks of Freescale Semiconductor, Inc. All other product or service names are the property of their respective owners. (c) Freescale Semiconductor, Inc. 2006. All rights reserved.
RoHS-compliant and/or Pb- free versions of Freescale products have the functionality and electrical characteristics of their non-RoHS-compliant and/or non-Pb- free counterparts. For further information, see http://www.freescale.com or contact your Freescale sales representative. For information on Freescale.s Environmental Products program, go to http://www.freescale.com/epp.
MRF6S19140HR3 MRF6S19140HSR3
Rev. 12 4, 5/2006 Document Number: MRF6S19140H
RF Device Data Freescale Semiconductor

▲Up To Search▲

Price & Availability of MRF6S19140H

	To Download MRF6S19140H Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .